Tanım

Electrical Resistance Probes are advanced online corrosion monitoring devices that enable real-time measurement of metal loss within pipelines and process systems. Based on the principle that corrosion thinning increases electrical resistance, these probes provide continuous, accurate data without requiring system shutdown or physical retrieval. Suitable for a wide range of industrial environments, they serve as an essential tool for predictive maintenance and integrity management.

İsim	EMT-CP High Pressure Elecrical Probe For Pipeline Testing
Malzeme	Stainless Steel 316、L DUPLEX SS
Çalışma sıcaklığı	-20~200℃
Özellikler	Birincisi, kolay çalışma
	İkincisi, yüksek doğruluk uzun ömür
	At last, high Efficiency Low cost
Ödeme	TT/LC
Avantajlar	Firstly, they are light weight and flexible.
	Ve sonra güzel enjeksiyon verimliliği.
	Sonunda, doğru konum izleme.

Avantajlar

1. Broad Applicability: Electrical Probes can be used in various media, including gas, liquid, solid, and flowing particles, demonstrating high versatility.

2. Ease of Operation and Real-Time Monitoring: The probes enable direct monitoring without the need for sampling. Their operation is simple and efficient, allowing for real-time data acquisition and analysis.

3. Rapid Response Time: They offer a significantly faster response compared to traditional methods like the weight loss technique, making them more suitable for dynamic conditions.

Parametreler

Technical specifications
Output signal	Wired form: RS-485 signal;
	Wireless form: LORA, 4G/5G wireless network signal
Power supply voltage	9-36VDC
Rated operating voltage	9VDC
Meter power consumption	5.4W (Wired)
Linear	0.0015％ non-linear
Resolution	17 bit
B	25.6 mV
Accuracy	±0.2% F.S (full scale)
Corrosion rate range	When the electrode area is 1cm², the measurement range is 4X10-4~10mm/a
Working and storage conditions
Operating temperature	－40~70℃
Storage temperature	－40~85℃
Structural parameter
Protection level	IP66
Shell material	Cast aluminum or PVC, aviation aluminum, stainless steel can be customized
Process interface	7/8-20UNEF (Insert probe)
Electrical connection	M20*1.5mm
Access cable Model	RVVP 2*1.5mm² (Minimum Uygulama Standardı)
Kurulum	The probe is installed directly on the pipeline, and the transmitter can be installed in one piece or separately through the cable
Ağırlık	500g
Split type accessory	Interface: MS-14-6S double female head
Split connection cable	Cable length: 1-3 meters can be customized

Contact us for more product details